CLASSIFICATION
HCT2-200 digital hot air pen (replacing HCT2-200)
HCT2-200 digital hot air pen (replacing HCT2-200)
The newly added product in the new HCT2-120 hot air pen Metcal convection repair tool. This digital handheld convection tool is very suitable for applications that use smaller components and integrated circuits. The ergonomic pencil handle allows users to more freely access and repair components on the circuit board without affecting adjacent components.
This digital handheld heat convection tool is very suitable for repairing small components and integrated circuits. With the development of miniaturization in electronic manufacturing (such as 01005 components), the ergonomic pen handle allows users to approach and repair components on the circuit board more freely without affecting surrounding components. Traditional hot air guns, due to their higher lower limit airflow, will remove surrounding elements when heating components
Item. The HCT2 series digital hot air pens typically include a set of precisely controlled hot air nozzles, while the HCT2-200 improves heat transfer performance and allows users to easily repair more types of components. And Metcal is equipped with a curved hot air nozzle option that can be used for working under a magnifying glass. Please use the brand new HCT2-200 to experience the improved performance.
Product application: HCT2-200 is mainly used for small surface mount components and packaging sizes (such as 1206 and smaller) as well as small and dense circuit boards. For dense circuit boards, multilayer boards with more than four layers, and components larger than 5mm, Metcal preheating stations (such as PCT-100 series) can be considered. HCT2-200 Digital Hot Air Pen Working Environment Temperature 10 to 40 ° C
Input voltage -11 110 VAC, -21 220-240 VAC,
Input voltage frequency 50/60 Hz
Rated power 200W
Airflow range 1.5-7.0 LPM
Noise level less than 52 decibels under maximum airflow
Output temperature range 100 ° -450 ° C
Temperature stability 10% display temperature (>250 ° C)
Certification/Marking cNRTLus, CE, RoHS WEEE
Surface impedance 10 5-10 9 Ω/sq
Host size w x d x h: 10.6cm (4.2 ") * 21.3cm (8.4") * 17.0cm (6.7 ")
Bracket dimensions w x d x h: 7.6cm (3.0 ") * 16.8cm (6.6") * 8.6cm (3.4 ")
? 6? 7. Host weight: 5.8lbs (2.63kg)
Bracket weight: 0.9lbs (0.4kg)
Metcal HCT2-120 Digital Hot Air Pen
new typeHCT2-120Hot air penMetcalThe recently added product in the convection repair tool. This digital handheld convection tool is very suitable for applications that use smaller components and integrated circuits. The ergonomic pencil handle allows users to more freely access and repair components on the circuit board without affecting adjacent components.
HCT2-120 digital hot air pen features:
1.120 watt ceramic heater and two-stage air pump:Provide necessary power and performance, and transfer an appropriate amount of thermal energy.
2. Digital airflow and temperature control:2individualLEDThe display screen represents the required airflow and temperature in graphical and numerical form.
3. Rapid response and performance:A microprocessor controlled closed-loop feedback system provides fast heating, precise and stable temperature control.
4. Power saving mode:When the handle is placed on the iron frame, the temperature will decrease, extending the life of the heater.
5. Universal power supply:Automatically detect input line voltage and make corresponding adjustments for global operation without the need for adapters or performance changes.
6. The handle adopts ergonomic design, which is lightweight and equivalent to a pencil with a rubber grip, increasing the comfort of operation.
7. Suction nozzle:This device contains six suction nozzles(1.5millimeter- 4.0millimeter)The soldering iron holder has a nozzle bracket.
8. Easy replacement of heater and nozzle:It takes only a few seconds to replace both
|
HCT2-120Digital hot air pen |
|
|
include: |
|
|
HCT-HTR120 |
120 Quick replacement heater for tile |
|
HN-120KIT-6 |
6 A suction nozzle kit(1.5Millimeters2.0 Millimeters2.5 Millimeters3.0 Millimeters3.5 Millimeters and 4.0 millimeter) |
|
HCT-WS120 |
Iron holder with nozzle holder |
|
A |
Heat resistant nozzle disassembly |
HCT2-120technical parameter
|
Working environment temperature |
10~40℃ |
|
|
input voltage |
100~240Voltage and grounding circuit detection |
|
|
Input frequency |
50/60hertz |
|
|
Rated power |
750tile |
|
|
airflow |
1.5~7.0rise/minute |
|
|
Noise level |
Under maximum airflow conditions, below52Decibel |
|
|
Output temperature stability |
Display value ±10% |
|
|
authentication/identification |
cNRTLus,CE,ROHS WEEE |
|
|
Surface resistance |
105Ω~105Ω |
|
|
Power host size (width)XlongXHigh) |
10.6cm(4.2``)x21.3cm(8.4``)x17.0cm(6.7``) |
|
|
Handle bracket size (width)XlongXHigh) |
7.6cm(3.0``)x16.8cm(6.6``)x8.6cm(3.4``) |
|
|
Weight of power host |
5.8Pound（2.63Kilogram) |
|
|
Weight of handle bracket |
0.9Pound（0.4Kilogram) |
|
